Intel 810 Baby AT Mainboard
AWARD BIOS SETUP
4-23
4.14
SET USER PASSWORD
CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Optimized Defaults
Advanced Chipset Features
Set Supervisor Password
Integrated Peripherals
Set User Password
Power Management Setup
Save & Exit Setup
PNP/PCI Configuration
Exit Without Saving
PC Health Status
ESC : Quit
↑↓→←
: Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type ...
The User Password can be used to check the user's authority. However, this password
entry is somewhat different to the "SUPERVISOR PASSWORD" mentioned in previous
page. The User Password will have different function according to the "Supervisor
Password" and the "Security Option" setup in Section 4.5:
A. When there is the password stored in the "SUPERVISOR PASSWORD"
1. When "Setup" is selected in Security Option:
When you use the "User Password" to log into the BIOS setup program, you can
only select "User Password", "SAVE & EXIT SETUP" and "EXIT WITHOUT
SAVING" from the main menu. (Use Supervisor Password to log into the PC
system, you will have the complete right to on all BIOS settings.)
2. When "System" is selected in Security Option:
When turn on the PC system, it will request you to enter the Password. Without
correct password, PC system will stop and the operation system won't be loaded.
B. When there is no password stored in the "SUPERVISOR PASSWORD"
1. When "Setup" is selected in Security Option:
Users can use the "User Password" to log into the BIOS setup program, and they
can make all the change in the BIOS setup program.
2. When "System" is selected in Security Option:
When turn on the PC system, it will request you to enter the Password. Without
the correct password, the PC system will stop and the operation system will not
be loaded.
