Intel 810 Baby AT Mainboard
UPDATE THE SYSTEM BIOS
5-3
PROCESS ". Remove the floppy diskette from the floppy disk drive and then
click on the "F1" key to restart the PC system.
8.
If you found the PC system is restarting, then it indicates that the BIOS update
which you have made was successful.
9.
When the PC system is restarting, click on the "DEL" key to trigger the BIOS
setup program. Select the "Load Optimized Defaults" to have the optimized
parameter loaded into the system and then select the "Standard CMOS Features"
to check whether the floppy disk drive is detected by the system BIOS correctly.
When finished, select "Save and Exit" to save the change.
10.
When you have completed the procedure above, all the BIOS update procedure is
completed. From now on, you can use the new BIOS in your PC system..
Note
: In case that made some mistake and your PC system failed to
work. Please us the KEYBIOS to rescue the system BIOS. The
KEYBIOS is a new technology and it will rescue the system
BIOS from all kind of damage.
