Intel 810 Baby AT Mainboard
INTSTALLATION
2-3
Enable the “Resume by Alarm” selection
in the BIOS setup utility, and then you will
see the input request for the date and time. (the “Resume by Alarm” is
located in the
“POWER MANAGEMENT SETUP”, please refer to Section 4.8),
When you have
stored the RTC alarm setting, the PC system will be turned on automatically
according to the date and time which is recorded in the CMOS memory.
¨
MODEM RING-IN
When you have an
external
modem installed, you can leave the PC system power
off. Whenever there is the incoming message, the PC system will be triggered by the
ring-in signal and wake up automatically to receive the message for you. From now
on, you can tell your PC system to receive the fax message for you.
In order to use the ring-in signal to wake up your PC system, you will have to use the
EXTERNAL MODEM
and have it connected to one of the
SERIAL PORTS
( COM1 or COM2 ) on the mainboard. When the mainboard detects the ring-in
signal from the serial port, the system power will be turned on and start to receive
the incoming messages automatically. ( you need to have the software like Award
Zero-Volt Data-Suspend Utility so that you can use the fax utility to receive the
incoming fax message ). To enable the Modem Ring-In feature, you have to run the
BIOS setup utility and enable the “Power On by Ring / LAN” option
(please refer to
Section 4.8 for the settings).
Note: This function is not available when using the internal MODEM card.
¨
WAKE ON LAN ( WOL )
There is a WOL connector CN16 on the mainboard which is designed to connect to
the signal from a LAN card which supports the Wake On LAN feature. When such
LAN card is installed, you may turn on the PC system from the remote server and
monitor the PC status. To enable this feature, you will have to use the BIOS setup
utility to enable the “Power On by Ring / LAN” in the BIOS setup program.
2.3
POWER OFF THE PC SYSTEM
There are two ways to power off the system. They are “Shut Down by Power Button”
and “ Shut Down by OS”. (When you are using the ATX power supply, you can choose
the
Shut Down
from the file menu in the Windows® operation system and the system
will be powered off immediately ).
