Intel 810 Baby AT Mainboard
HARDWARE SETUP
3-16
5.
PW
Power On / Off and External Suspend Switch Connector
If you are using the ATX power supply, the PW connector will have two
different functions according to the setup in CMOS. It can be the Power
Switch or Suspend Switch of your PC system. (please refer to Section- 4.8
for BIOS setup)
Q
If the setup in CMOS is “Delay 4 Sec.”, the function of “PW” will be
:
A. When system power is OFF :
Press the PW switch, the system will be powered on.
B. When system power is ON :
a. The system is in Full-ON mode :
a-1. Click on this switch ( less than 4 seconds ), the system will be
turned into Suspend mode. (the GREEN mode)
a-2. Press and hold this switch for more than 4 seconds, the system
will be powered off.
b. When the system is in Suspend mode :
b-1. Click on this switch ( less than 4 seconds ), the system will return
to Full-ON mode.
b-2. Press and hold this switch more than 4 seconds, the system will
be powered off.
R
The setup in CMOS is “Instant-off”:
A. When system power is off :
Click on this switch, the system will be powered on.
B. When system power is on :
Click on this switch, the system will be powered off instantly.
