SECTION 8-PARAMETER SETTINGS
!!! User cannot reach parameter menu while the device drives motor. Likewise the device cannot drive
motor if system is in parameter menu.
8.1 SPEED PARAMETERS
This section has parameters about speed adjustments. Parameter list and informations are listed in Table
8.1.
Table 8.1 Speed Parameters
CODE
PARAMETER NAME
SECTION
S01
V1 Speed (Slow speed)
8.1.1 Speed Selection
S02
V2 Speed (Inspection speed) 8.1.1 Speed Selection
S03
V3 Speed (Middle speed)
8.1.1 Speed Selection
S04
V4 Speed (High speed)
8.1.1 Speed Selection
S05
V5 Speed (Ultra speed)
8.1.1 Speed Selection
S06
V6 Speed (Releveling speed) 8.1.1 Speed Selection
S07
VR Rescue Speed
8.1.1 Speed Selection
S08
Start Mode
8.1.1 Speed Selection
S09
Start Speed
8.1.1 Speed Selection
S10
Acceleration
8.1.2 Acceleration
S11
Acc Curve 1
8.1.2 Acceleration
S12
Acc Curve 2
8.1.2 Acceleration
S13
Deceleration
8.1.3 Deceleration
S14
Deceleration Curve 1
8.1.3 Deceleration
S15
Deceleration Curve 2
8.1.3 Deceleration
S16
Deceleration Mode
8.1.3 Deceleration
S17
Stop Speed
8.1.4 Stopping
S18
Stop Speed Reference
8.1.4 Stopping
S19
Speed Input
8.1.1 Speed Selection
S20
DB Speed
8.1.1 Speed Selection
S21
Speed Format
8.1.1 Speed Selection
8.1.1 Speed Selection
Speed of lift assign by [S01]-[S07] parameters. Functions in speed input parameter are only for guidance.
All speed input parameters can be use as desired speed function.
8.1.1.1 Speed Triggering
1) If [S19] = 0, all speed input has functionality with own speed parameter,
2) If [S19] = 1, only S1,S2 and S3 inputs have functionality with Binary Code.
3) If [S19] = 2, only S1,S2 and S3 inputs have functionality with Gray Code.
F/7.5.5.02.95 R:1
19
AE-LIFT