5.3 MAIN SCREEN and INFORMATION SCREENS
All informations about AE-Lift are display on the LCD.
5.3.1 Startup Screen
A E - L i f t
v 1 . 0 8 n
1 6 7 2
2 5
°
C
5.3.2 Main Screen
Main screen has two different display screens according to motion mode.
5.3.2.1 Main Screen on Standby Mode
E :
0 r p m
0 . 0 A
S T A N D B Y
MO D E
5.3.2.2 Main Screen on Travel Mode:
Figure 5.2 Main Screen (Travel Mode)
Screen turns to this mode automatically by motion command. S illustrates reference speed, B illustrates
status, E illustrates encoder speed and A illustrates output current.
5.3.3 Version and Serial Number Information Screens
Version screen displays by ESC button. When ESC button hold pressed until 3 sec, serial number and
device power (kW) will display.
5.3.3.1 Version Information Screen
A E - L i f t
v 1 . 0 8 n
1 6 7 2
2 5
°
C
5.3.3.2 Serial Number Screen
S N : 0 0 0 2 5 6
7 . 5 k
W
A Y B E Y
E L E K T R O N
i
K
F/7.5.5.02.95 R:1
16
AE-LIFT
S: 0rpm B:1
E: 0rpm 0.0A
Reference Speed
Status
Encoder Speed
Output Current
This screen has version number and motion counter
informations.
This screen has serial number (SN) and device power (kW)
informations.
This screen displays on start-up. “1.08n” characters illustrates
the version of microcontroller. Motion counter (1672) and
temperature is shown at the bottom line of LCD.
This screen is shown when no motion command in system. “E”
character illustrates the measured speed from encoder and “A”
illustrates the output current.
