Axell D-MBR 3007-3008-PS-NFPA
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd
UMCD00013 Rev 2.2
19
6. Insert the clamps including the screws in to the upper orifices leading inside the
Repeater.
Figure 3-6. Locking Clamp
7. Using the Allen screwdriver (item 8 in Figure 3-1), tighten the hex screw of the
clamp.
8. Insert two hex washer head screws (item 3 in Figure 3-1) including spring washers
(item 4 in Figure 3-1) into the lower orifices of leading inside the Repeater.
Figure 3-7. Locking Clamp Locations
9. Use the Allen screwdriver (8 in Figure 3-1) to tighten the hex screws.
10. Verify that the Repeater is firmly mounted.
11. Close the Repeater cover. Do not lock yet since you will need to open it to perform
the Local setup procedure.
Upper orifice
Lower orifice
Lower
orifice
Upper orifice
