AWH Tanko RT, Руководство по эксплуатации и установке, Страница: 89 / 132

ATEX Retractor System TANKO-RT/-RTS
6 Start-up Translation - Operating/installation instructions 2020/01 79/121
WARNING
Incorrect operation of the device!
There is a risk of death or severe physical injury.
 Only operate the device in perfect condition.
 Only operate the device installed inside a closed container.
 Drain and depressurize the container to be cleaned.
 Close all openings on the container (e.g. inspection openings) firmly.
 When operating the device, adhere to the switch-on and switch-off procedures
(see
Sections 6.3 Switch-On Procedure and 7.3 Switch-Off Procedure ).
 There is no need for the device to be run in.
 The following operating states of the device are NOT permitted:
–
Operation of the device without cleaning medium.
–
Immersing the device in the product of the production process.
–
Operation of the device outside the permitted parameters
(see
Section 3.3 Technical Data ).
 Immediately stop operation in the event of any leaks outside the container.
 Refrain from any type of work which compromises the safe and reliable function of the device.

Immediately inform the owner of any changes to the device or the plant that could impair its safety.
If you notice vibrations on the plant that are NOT caused by the device during start-up of the device,
these must be prevented by suitable measures so that the vibrations CANNOT be transferred to the
device.
If this is NOT possible, the maintenance intervals must be shortened in accordance with
Section 7.4.1 Maintenance Intervals .
During normal operation of the device, you must make sure that the mixture of supplied cleaning
medium and dissolved substances can flow freely out of the container.
NOTE
Any clogging in the drain of the container is to be eliminated at once in order that:
–
no large quantities of dirt can accumulate in the container,
–
there is NO impermissible filling of the container with cleaning medium,
–
the device is NOT immersed in the rising fluid level.
For cleaning agent in circulation:
Run the final cleaning step with clean water to remove any suspended matter that may have been
introduced.