AWH Tanko RT Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 132

AWH Tanko RT Скачать руководство пользователя страница 99

ATEX Retractor System TANKO-RT/-RTS

7 Maintenance

Translation - Operating/installation instructions 2020/01

89/121

7.4

Maintenance

To ensure the trouble-free operation, high operational safety and long service life of the cleaning device,
it is essential to have it cleaned and maintained at regular intervals.

NOTE ON EXPLOSION PROTECTION

Work on the device in a potentially explosive atmosphere is PROHIBITED!
If this is not observed, the explosion protection could be disabled.



Only allow instructed personnel to work in potentially explosive atmospheres.



The personal protective equipment must meet the explosion protection requirements.



Do not use a tool that could create sparks.

We recommend that you document the maintenance work in a report.

The safety instructions in

Section 7.1 Safety Instructions for Maintenance

must be adhered to when

carrying out cleaning, maintenance and repair work.

WARNING

Danger from the magnetic field (magnetic ring in pneumatic cylinder) during assembly
and disassembly of the device!
Magnets generate a wide-ranging, strong magnetic field. Among other things, they can
damage devices (e.g. televisions, laptops, computer hard drives, data carriers, credit and
EC cards, clocks, hearing devices and loudspeakers).
Magnets can cause malfunctions for individuals with cardiac pacemakers and/or serious
endangerment of their health.
There is a risk of death or severe physical injury.



Assembly or disassembly must not be carried out by persons with pacemakers.



Maintain a minimum safety distance of at least 0.5 m between magnet
carriers/magnets in the device and objects and technical devices whose function can
be impaired by magnetic fields.

CAUTION

Danger of catching/entanglement in rotating components!
Failure to observe it can result in minor or moderate injury.



Beware of moving parts whenever working with the device.



Wear tight-fitting work clothing.

«
...
97
98
99
100
101
...
»

Содержание Tanko RT





































































































































Отзывы:

Нет отзывов