ATEX Retractor System TANKO-RT/-RTS
100/121
Translation - Operating/installation instructions 2020/01
7 Maintenance
NOTE
Risk of damage to the device during cleaning!
The use of an incorrect cleaning agent or sharp objects can damage the device.
The functional safety and reliability of the device may be impaired.
The cleaning agents must be approved for all materials in the device (e.g. gaskets,
bushings).
Do not use sharp objects (e.g. knives) or tools.
Before commencing cleaning work, the working steps of the switch-off procedure must be carried out
(see
Section 7.3
Prior to cleaning, the device must have been removed from the container by an expert and
disassembled into its individual parts. The safety instructions in
Section 7.1
Cleaning is carried out when disassembled by simply washing the surfaces that come into contact with
media or using an ultrasonic bath.
Cleaning media:
e.g. 3% caustic soda
Temperature:
max. 70 °C
–
Only use clean and chlorine-free water as a diluting agent.
–
Measure carefully to avoid overly strong concentrations of cleaning agent.
–
Rinse with plenty of clean water after cleaning.
–
When cleaning the parts of the device outside the container, make sure that dust and adhering
materials (e.g. grease and oil residues) are removed.
Cleaning of the device in a disassembled state can be carried out by instructed persons. After cleaning,
the device must be assembled, checked and reinstalled in the container by an expert (see
Section 5.2
NOTE
Environmental damage in case of improper disposal!
Cleaning agents, consumables and lubricants must NOT be allowed to get into the
groundwater, waterways or sewer system.
There is a risk of environmental damage.
Dispose of any cleaning agents, lubricants and consumables (e.g. brushes and cloths)
which have been used for cleaning in accordance with the local regulations and in
accordance with the information in the manufacturer’s safety data sheets.
Dispose of packaging materials in an environmentally friendly manner and have them
recycled.