AWH Tanko RT Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 132

AWH Tanko RT Скачать руководство пользователя страница 100

ATEX Retractor System TANKO-RT/-RTS

90/121

Translation - Operating/installation instructions 2020/01

7 Maintenance

NOTE

Danger due to leaks at the connections!
The sealing elements of the process connection [PC] and media connection [MC] are
manufactured in accordance with the technical requirements for sealing surfaces.
Incorrect operation of the device can cause damage to the sealing elements
(e.g. scratches and tears).
This can result in the penetration or emergence of media (zone carryover) at the
connections.
This can result in leaks and the corresponding dangers.



Protect sealing elements from damage and contamination during transportation,
storage, assembly and cleaning!



Check them regularly for impermeability



Replace the seal in the event of leaks



If these measures are not successful, contact the manufacturer.

NOTE

Risk of damage to the device due to improper assembly/disassembly work!
Assembly/disassembly of the device which is NOT performed properly can cause
damage to the device which puts the functional safety and reliability at risk when
re-commissioning.
The failure of components or a device malfunction can cause material damage and
consequential damage.



Use a vice with protective jaws, e.g. of plastic or light metal, for clamping.



Only use suitable tools that do not damage the surface.



During assembly, observe the specified tightening torques (see

Section 7.5 Spare

Parts and Customer Service

NOTE

Dirt and foreign matter in the device!
Dirt or foreign matter can impair the functional safety of the device.



During installation, make sure and check that there is no dirt or foreign objects in the
device (e.g. small particles, sealing material).

«
...
98
99
100
101
102
...
»

Содержание Tanko RT





































































































































Отзывы:

Нет отзывов