AWH Tanko RT, Руководство по эксплуатации и установке, Страница: 35 / 132

ATEX Retractor System TANKO-RT/-RTS
2 Safety Translation - Operating/installation instructions 2020/01 25/121
C
le
ani
ng
p
roces
s
greater
than
85 °C up
to 95 °C
greater
than
85 °C up
to 95 °C
The device assumes
max. the temperature of
the cleaning medium or
that of the container,
plus 10 °C of intrinsic
heating. The result
is a max. surface
temperature of the
device of 105 °C. If potentially explosive
mixtures outside
atmospheric conditions are
possible in the container, the
cleaning process is not part
of the intended use under
these conditions and
requires a separate hazard
assessment. --- --- Temperature monitoring on the
pneumatic cylinder necessary!
Heating to 95 °C is possible, plus
10 °C intrinsic heating results in
a maximum surface temperature of the
non-electrical part of 105 °C. Ambient
temperature outside max. 40 °C. The
electrical equipment has a maximum
surface temperature of T95 °C.
This results in the maximum surface
temperature of 105 °C.
Dusts of dust groups IIIA,
IIIB or IIIC.
The electrical equipment
and the non-electrical
part meet the
requirements of explosion
group IIIC. T105 °C Db
Id
le
s
tat
e (
no c
le
an
ing
)
n/a max.
60 °C
The device assumes
max. the temperature of
the container. Dusts of dust groups IIIA, IIIB
or IIIC T60° Da Heating to 60 °C is possible, which
results in a maximum surface
temperature of the non-electrical part
of 60 °C. Ambient temperature outside
max. 40 °C. The electrical equipment
has a maximum surface temperature
of T95 °C.
This results in the maximum surface
temperature of T95 °C.
Dusts of dust groups IIIA,
IIIB or IIIC.
The electrical equipment
and the non-electrical
part meet the
requirements of explosion
group IIIC. T95 °C Db
Id
le
s
tat
e (
no c
le
an
ing
)
n/a greater
than
60 °C up
to 95 °C
The device assumes
max. the temperature of
the container. If potentially explosive
mixtures in the container
outside atmospheric
conditions are possible, the
device has no potential
ignition source other than
the hot surface with the
temperature of the
surrounding container when
used as intended in idle
state. --- --- Temperature monitoring on the
pneumatic cylinder necessary!
Heating to 95 °C is possible, which
results in a maximum surface
temperature of the non-electrical part
of 95 °C. Ambient temperature outside
is maximum 40 °C. The electrical
equipment has a maximum surface
temperature of T95 °C.
This results in the maximum surface
temperature of T95 °C.
Dusts of dust groups IIIA,
IIIB or IIIC.
The electrical equipment
and the non-electrical
part meet the
requirements of explosion
group IIIC. T95 °C Db