ATEX Retractor System TANKO-RT/-RTS
6 Start-up
Translation - Operating/installation instructions 2020/01
75/121
6.3
Switch-On Procedure
In accordance with the type of device activation and how it is integrated (e.g. manual or automatic) on
the cleaning plant, the switch-on procedure must be integrated and the following instructions must be
observed when switching on.
WARNING
Risk from sudden, unforeseeable or unauthorized activation of the device (e.g. triggering
of a start command as a result of incorrect operation of a start-up control device)!
There is a risk of death or severe physical injury.
During start-up of the device, it is essential to perform the following work steps in the
specified order.
Switch-on procedure
1.
Firmly close all openings on the container (e.g. inspection openings).
2.
Empty and depressurize the container.
3.
Switch on the electrical power supply.
Check to make sure that the electrical power supply is NOT interrupted and that
there is voltage available at the sensors.
Take suitable measures to secure the electrical power supply to prevent it from
being switched off suddenly, unexpectedly or without authorization.
4.
Switch on the compressed air supply to the pneumatic cylinder.
Check that the compressed air supply is NOT interrupted and that the air pressure
on the device is established.
Take suitable measures to secure the compressed air supply to prevent it from
switching off suddenly, unexpectedly or without authorization.
5.
Follow the function sequence for the device in accordance with the diagram.
6.
Switch on the cleaning medium supply (e.g. slowly open the shut-off valve or ball cock).
Check that the supply of cleaning medium is NOT interrupted and the media
pressure is established at the device.
Take suitable measures to secure the supply of cleaning medium to prevent it from
being switched off suddenly, unexpectedly or without authorization.