AWH Tanko RT Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 132

AWH Tanko RT Скачать руководство пользователя страница 91

ATEX Retractor System TANKO-RT/-RTS

7 Maintenance

Translation - Operating/installation instructions 2020/01

81/121

DANGER

Risk of fatal injury from electric shock through contact with live parts!
Activated electrical components are live with dangerous electrical voltage and may
perform uncontrolled movements.
There is a risk of death or severe physical injury.



Allow only qualified electricians to perform work on the electrical system.



Before starting work, observe the work steps of the switch-off procedure (see

Section



Cover adjacent live parts to prevent contact.



Beware of the hazards caused by electrical current (e.g. warnings).

WARNING

Risk of falling when working at heights!
When carrying out assembly/disassembly work on parts of the plant at height, there is a
risk of falling.
There is a risk of death or severe physical injury.



Do not perform any work at heights except with a safety platform with cage or suitable
fall protection (e.g. safety rope and safety harness).



If you are using a harness for fall protection, it is essential that the rescue concept is
observed for a person in the harness.



A person must not remain suspended in the harness for longer than 15 min as there is
otherwise a risk of shock or even death.



Wear protective work clothing, safety shoes, protective gloves and a hard hat for work
at heights.

WARNING

Risk of accident caused by incorrectly performed maintenance and repair work!
Improper maintenance, falling components or failure to adhere to the listed safety
instructions can cause accidents.
There is a risk of death or severe physical injury.



Only have experts perform work on the device.



Do not work on the device unless it is disconnected from the power supply,
depressurized and in cold condition.



Maintain a safe distance when working on the device.
We recommend that you provide 1 m space for free movement around the device and
container.

«
...
89
90
91
92
93
...
»

Содержание Tanko RT





































































































































Отзывы:

Нет отзывов