AWH Tanko RT Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 132

AWH Tanko RT Скачать руководство пользователя страница 57

ATEX Retractor System TANKO-RT/-RTS

3 Design and Function

Translation - Operating/installation instructions 2020/01

47/121

WARNING

Danger due to corrosive and irritant cleaning medium!
When handling the cleaning medium, it is IMPOSSIBLE TO EXCLUDE the risk of inhalation,
swallowing, contact with the skin, eyes and mucous membranes.
There is a risk of death or severe physical injury.



Adhere to the regulations and specifications in the safety data sheets for the cleaning
media (e.g. vapors or hazardous substances).

CAUTION

Danger as a result of using incorrect cleaning media!
Due to their material resistance, the materials used in the device impose certain
restrictions on the cleaning media used.
Failure to observe these restrictions can result in the failure of components or a device
malfunction, causing material damage and consequential damage.



The cleaning media must be approved for all of the materials of the device (e.g. seals,
bushings) and for the substances to be cleaned in the container that come into
contact with it.



Cleaning media containing the following (corrosive) substances must NOT be used:

–

chlorine and chlorine ions

–

substances containing salt (no resistance to seawater)

–

moderately to highly concentrated organic acids

–

strong acids, in particular nitric acid and sulfuric acid (with acid content >65%)

–

aliphatic, aromatic and chlorinated hydrocarbons

–

phenols

–

fluorine compounds

NOTE

Risk of damage to the device from the cleaning medium!
Dirt or foreign matter in the cleaning medium can have a negative effect on the functional
availability of the device.
There is a risk of material damage and consequential damage.



Use a suitable filter system in the cleaning medium supply line. The use of a filter with
a filtration effect corresponding to a mesh width of 50 µm is recommended.



Adhere to the instructions on the supply and return lines in

Sect

ion

5.2 Installation

«
...
55
56
57
58
59
...
»

Содержание Tanko RT





































































































































Отзывы:

Нет отзывов