AVIWEST DMNG PRO 100, Руководство пользователя

Страница: 55 / 78

55
Configuring a Live profile for Streaming over BGAN
Streaming over BGAN terminals is more appropriate for stationary scenes. To obtain the best
video quality possible, please set the camera to output SD resolution.
To configure a Live profile designed to be used for streaming over BGAN terminal, you have
to know:

the type of BGAN terminal;

the BGAN service offer, i.e. the download and upload speeds.
To operate properly with the DMNG PRO, the upload speed must be at least 256kbps,
and the download speed must be 64kbps minimum.
①
Enter a name for the Live profile.
②
Select the RTP output mode.
③
Select the BGAN bonding mode.
④
Set the latency.
We recommend you to set the latency at 3000ms. The minimal latency is 2500ms.
⑤
Select the bitrate mode according to the BGAN terminal to use:
o
Select the CBR video bitrate mode if your terminal is a Hughes 9201.
o
Select the VBR video bitrate mode if your terminal is an Explorer 710 which
firmware version is 1.04. Please note that if your BGAN terminal is an
Explorer 710 with a software version 1.04, please refer to the document
Configuring an Explorer 710 available on our Extranet.
⑥
Set the Frame rate , the video and audio settings according to the maximal upload
speed:
BGAN
Maximum
Upload
Speed
Video
Resolution
Frame rate
Video Bitrate Audio Settings
W/o
Intercom
Intercom
Channel
Mode
Audio
bitrate
256kbps QVGA Full 180 160 Stereo 24
384kbps
CIF Full 300 280 Stereo 32
SD Low 300 280 Stereo 32
650kbps
HHR Full 550 530 Stereo 32
SD Low 550 530 Stereo 32
Notes : In VBR bitarte mode, you do not have to set the video capped bitrate.
Use only one microphone when the audio channel mode is Stereo.
⑦
Click the "SAVE CONFIG" button.
⑧
Click the "RELOAD CONFIG" button.