AVIWEST DMNG PRO 100, Руководство пользователя

Страница: 53 / 78

53
⑫
Click the "SAVE CONFIG" button.
⑬
Click the "RELOAD CONFIG" button.
Configuring a Live profile for Streaming over KA band
To configure Live profiles for streaming using KA terminals, first you have to determine if
only KA terminals will be used (one or two) or if KA terminals will be used with cellular links.
Then, you must also know the maximal throughput, which depends on the service offer.
Configuring Live Profiles for Streaming over KA band only
①
Enter a name for the Live profile.
②
Select the RTP output mode.
③
Select the KA bonding mode.
④
Set the latency according to your main constraint:

Low latency: 1500ms

High video quality: 3000ms

If your main constraint is the transmission robustness, please see Config-
uring Live Profiles for Streaming over KA band and Cellular Networks .
⑤
Select the video resolution and set the video bitrate according to the maximal
throughput that the service offer allows:
Maximal
throughput
Max. Video
Resolution
Max. Video Bitrate
(kbps)
2Mbps SD 1,400
4Mbps HD 3,000
6Mbps HD 4,900
Note : If you use 2 KA terminals with 2 distinct service offers, you have to set the
video bitrate according to the lowest maximal throughput.
⑥
Select the CBR bitrate mode.
⑦
Configure the audio settings.
⑧
Click the "SAVE CONFIG" button.
Configuring Live Profiles for Streaming over KA band and Cellular Networks
①
Enter a name for the Live profile.
②
Select the RTP output mode.
③
Select the KA bonding mode.
④
Set the Max Redundancy Percent .
In Live profiles configured with the KA bonding mode and VBR bitrate mode, the
redundancy percentage only applies to the cellular connections, and does not apply
to the KA links.