Aventura CAM-5Z-27X, Инструкция по установке и эксплуатации

Страница: 25 / 39

21 / 35
4.3.3.3. POWER UP SUBMENU
POWER UP
POWER UP ACTION NONE
BACK
EXIT
Screen 11: Power UP Sub-Menu
Option Value Explanation
POWER UP ACTION
NONE
No action is performed at the end of power up.
AUTO SCAN
The camera performs an auto scan at the end of power up: the
camera performs a 360 horizontal scan operation.
RANDOM SCAN
The camera performs a random scan at the end of power up:
the camera performs a random 360° scan pausing for
approximately 2” every 142°.
FRAME SCAN
The camera performs a frame scan at the end of power up:
the horizontal scan is performed in the SET SCAN limits.
PRESET 1/ PRESET 8
The camera goes to preset 1 or 8 at the end of power up.
PATTERN 1 ~ 4
The camera performs one of the 4 patterns at the end of
power up.
CRUISE
The camera performs a cruise at the end of power up: the
camera runs a cycle consisting of up to 30 preset positions.
TRACKING
The camera performs tracking action at the end of power up.
Table 10
4.3.3.4. PRESETS SUBMENU
PRESETS
PRESET NUMBER 1
…PRESET NOT DEFINED…
<EDIT PRESET LABEL>
<EDIT PRESET SCENE>
<CLEAR PRESET>
BACK
EXIT
Screen 12: Presets
Option Value Explanation
PRESET NUMBER 1-64
This option is used to select a presetting for entering a
descriptive label. This operation is allowed for up to 64
Presets.
Press the
OPEN
button and use the joystick to set the
number of the presetting to the stored. Press
OPEN
to confirm.
EDIT PRESET LABEL
This submenu is used to access writing mode for associating
a label to a presetting (see below).
EDIT PRESET SCENE
This submenu is used to store the Presets.
CLEAR PRESET
The submenu is used to delete the presetting descriptions.
Table 11
The camera will start a scanning cycle when a presetting or pattern is recalled. This scanning cycle may be
interrupted simply by moving the joystick.
EDIT PRESET LABEL submenu
This includes the operations needed for associating a label to a presetting.