Aventura CAM-5Z-27X, Инструкция по установке и эксплуатации

Страница: 16 / 39

Pic. 6
Set the DIP switches for SW1 and SW2 at the bottom of the dome drive for the appropriate receiver address,
communication protocol, and baud rate. Refer to the labels on the dome drive or DIP SWITCH SET at the beginning of
this manual.
Remove cover of camera and sponge. See Pic. 6.
Pic. 7
Line up link card and faucet of the back board of the dome. Push the dome drive in. See Pic. 7.
Step 3. Install lower dome.
Pic. 8
Take out a screw from lower dome. Link cables, screw, and lower dome. See Pic. 8.
Pic. 9
Line up the mounting screw holes, and install the two mounting screws. Push the lower dome inside the back box. See
Pic. 9.
Pic. 10
Screw the two mounting screws, and screws in the bracket. See Pic. 10.
12 / 35