Aventura CAM-5Z-27X, Инструкция по установке и эксплуатации

Страница: 27 / 39

A zone is a space defined on the display by the user. It may be associated to a label. Up to 8 zones may be defined.
Option Value Explanation
ZONE NUMBER 1 ~ 8
This option is used to select a zone.
Press the
OPEN
button and use the joystick to set the required
zone number.
Press
OPEN
to confirm.
EDIT ZONE LABEL
This submenu is used to associate a label to a zone (see
below).
EDIT ZONE
This submenu is used to create a zone (see below).
ZONE ENABLED ON/OFF
This is used to enable/disable each zone selected in the
“
ZONE NUMBER
” field.
CLEAR ZONE
This submenu is used to delete the zone selected in the “
ZONE
NUMBER
” field (see below).
Table 13
EDIT ZONE LABEL submenu
This includes the operations needed to enter labels to be associated to zones.
1) Use the joystick to point the cursor to the ”
EDIT ZONE LABEL
” option.
2) Press
OPEN
. The following menu will appear on the display:
ZONE NUMBER 1
ZONE LABEL 1 - - - - -
0 1 2 3 4 5 6 7 8 9 Y Z Y Z
A B C D E F G H I J K L M N O P Q R S T U V W X
INPUT MODE CHARACTER
A B C D E F G H I J K L M N O P Q R S T U V W X
OK CN SP BP
Screen 16: Zone Label Sub-Menu
3) Point the cursor to the first character to be used and press
OPEN
. Point the cursor to “
BKS
” (Backspace) to delete it.
4) After writing the text, point the cursor to
OK
and press
OPEN
to save and go back to the main screen.
EDIT ZONE submenu
This includes all the operations needed to program a zone.
1) Press “
► ” on “
EDIT ZONE
”.
2) Press
OPEN
to confirm.
3) Use the joystick to point to the required position to define the left limit of the zone to be created.
4) Press
OPEN
to confirm.
5) Use the joystick to point to the required position to define the right limit of the zone to be created.
6) Press
OPEN
to confirm.
7) Press
CLOSE
to cancel the operation.
CLEAR ZONE submenus
This includes the operations for deleting the selected zone.
23 / 35
4.3.3.7. CLEAR SETTINGS SUBMENU
CLEAR SETTINGS
CLEAR ZONES
CLEAR PRESETS
CLEAR PATTERNS
RESTORE FACTORY DEFAULTS
BACK
EXIT
Screen 17: Clear Settings Sub-Menu
This menu is used to delete the settings of several elements at one time (refer to the specific manuals for single
deletions).