Aventura CAM-5Z-27X, Инструкция по установке и эксплуатации

Страница: 20 / 39

1) Point the cursor to the label to be moved by moving the joystick vertically.
2) Press
OPEN
3) Symbol “ ■ ” will appear.
4) Position the entire label in the chosen position using the joystick.
5) Press
OPEN
.
Repeat this operation for each label.
Point the cursor “ ► ” to
SAVE
and press
OPEN
.
4.3.3. MAIN PROGRAMMING MENU (DOME SETTINGS 1)
In the first level menu, select
<DOME SETTINGS 1>
and the corresponding submenus to access the main menus.
DOME SETTINGS1
<CAMERA>
<MOTION>
<POWER UP>
<PRESETS>
<PATTERNS>
<ZONES>
<CLEAR SETTING>
PRESET NUMBER
256
BACK
EXIT
Screen 6: Dome Settings 1
Option Value Explanation
CAMERA
Camera parameter programming submenu (refer to
Section 4.3.3.1
)
MOTION
Camera motion parameter programming submenu (refer to
Section 0
)
POWER UP
Power up parameter submenu (refer to
Section 4.3.3.3
)
PRESETS
Preset parameter submenu (refer to
Section 4.3.3.4
)
PATTERNS
Pattern parameter submenu (refer to
Section 4.3.3.5
)
ZONES
Zone parameter programming submenu (refer to
Section 4.3.3.6
)
CLEAR SETTINGS
Clear settings submenu (refer to
Section 4.3.3.7
)
PRESET NUMBER 40/64/256
Maximum number of Presets. Always enter 256 (refer to
Section
4.3.3.8
)
Table 5
16 / 35
4.3.3.1. CAMERA (SUBMENU)
The first level of this menu contains the following options grouped as shown in the following table.
To edit the value, simply select the required menu item using the joystick with vertical movements and the
OPEN
button. Then edit as required. Select
BACK/EXIT
to close the item.
CAMERA
DIGITAL ZOOM OFF
BACKLIGHT COMP OFF
<PROGRAM AE MODE>
<OTHERS>
BACK
EXIT
Screen 7: Camera (Sub-Menu)
Option Value Explanation
DIGITAL ZOOM ON/OFF
Switch digital zoom
ON
or
OFF
.