254
OFF
ON
ON
ON
ON
ON
ON
ON
255
ON
ON
ON
ON
ON
ON
ON
ON
Table 2: SWITCH2 SETTING
Always use the “PELCO P” or “PELCO D” protocols.
It is advisable to select PELCO-D protocol at 9600 bps baud rate to ensure the correct operation of the camera
with the compatible products in the catalogue.
Do not use address “0” with the “PELCO P” and “PELCO D” protocols.
11 / 35
3.2. WALL MOUNT INSTALLATION
Step 1. Install the bracket for pendant dome
Pic. 3
When installing outdoors, make sure installation is properly sealed to keep moisture out.
Refer to the instructions supplied with the bracket. Take out cables for the dome through the bracket. See Pic. 3.
Pic. 4
Press the thumb fastener and open the hinged door to the back box. Take out hole of pin. Screw the metal cover into the
bracket. See Pic. 4.
Pic. 5
Connect cables to hole of pin. Insert the pin inside the back box. When finished, close the door to the back box and turn
on the power. The LED will light up. See Pic. 5.
If the LED does not light up, refer to Section 5:troubleshooting.
Step 2. Install dome drive
Содержание CAM-5Z-27X
Страница 1: ...INSTALLATION USER MANUAL For all CAM 5Z 27X and CAM 5Z 36X model PTZ Cameras...
Страница 2: ......
