AVANT 500 Series 2019 Скачать руководство пользователя страница 33

Страница: 33 / 64

500 Series

Operating instructions

Extra auxiliary hydraulics outlets, front
and rear (option)

In addition to the standard auxiliary hydraulics outlet, the

loader can be equipped with a double acting extra outlet.

The extra hydraulic outlet can be fitted either to the front of

the loader or to the rear, and the couplers are conventional

type quick couplers.

The loader can be equipped with either the rear hydraulics

outlet or with the extra front outlet – but not with both.

1. Extra auxiliary hydraulics in the

front

• Quick couplers are located

under the multi connector

2. Quick couplers in the rear

• Quick couplers are located on

top of the radiator.

If the extra auxiliary hydraulic

outlets is installed to the rear of

the loader, the outlet is double

acting type.

To use the extra auxiliary

hydraulic outlet:

The installed extra outlet

is controlled with the same

lever as the standard auxiliary

hydraulics.

To choose which is used, use

the switch on the dashboard:

1. Standard auxiliary hydraulics outlet (multiconnector)

2. Optional extra auxiliary hydraulics, front or rear

pressure 1 pressure 2

tank line

Front/rear

auxiliary

hydraulics

selector

switch

(option)

Содержание 500 Series 2019

































































Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды

AVANT 500 Series 2019, Руководство оператора

Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды