AVANT 500 Series 2019, Руководство оператора

Страница: 27 / 64

27
500 Series Operating instructions
Suspension seat
The suspension seat is equipped with seat belt, arm rests
and heating, and has the following adjustments:
1. Suspension adjustment
• by turning the knob counterclockwise suspension
gets harder, by turning it clockwise the suspension
gets softer
2. Angle of the back rest
• the angle of the back rest can be adjusted by turning
the knob
3. Seat position
• the distance of the seat from the steering wheel can
be adjusted with the lever which is located u n d e r
the front edge of the seat
4. Arm rest angle adjustment
• The angle of the arm rest can be adjusted by turning
the roller under the arm rest
Seat heater
The suspension seat is equipped
with an electric seat heater. Seat
heater switch and indicator are
located on the dashboard.
Seat belt and seat adjustments
Always use seat belt while driving. Make sure that the seat
is properly adjusted to keep vibrations transmitted by the
seat at minimum. Long term exposure to vibrations may
cause health effects. Also, as far as possible, keep the
operating terrain in good condition to minimize vibrations.
Air suspension seat (option for cab DLX)
To adjust the air suspension seat, sit
on the seat and switch the ignition
switch to “ON”. Check the indicator
on front of the seat. Pull the handle up
or push it down, so that the indicator
points the marker in the middle.
The seat is equipped with heater.
Heater switch is located of the back
rest on the left. Below it is located the
lumbar support adjustment.
NOTE: If the loader is equipped with
the air suspension seat, the seat
heater switch and its corresponding
indicator light on the dashboard are
disabled.
2
1
3
4