AVANT 500 Series 2019 Скачать руководство пользователя страница 41

Страница: 41 / 64

500 Series

Operating instructions

Coupling the hydraulic hoses of the attachment

Hydraulic hoses of the attachment are equipped with the multi connector system, which connects all hoses at the same time.

Coupling the multi connector

Align the pins of the attachment connector with corresponding holes of the

loader connector. Connecting is not possible if the multi connector for some

reason is connected in a wrong way on the attachment hoses. Connect and

lock the multi connector by turning the lever towards the loader.

The lever should move easily all the way to the locking position. If the lever

doesn’t move easily, check alignment and position of the attachment and

loader side connectors. Clean the connectors. Stop the engine and release the

pressure in auxiliary hydraulics line.

Disconnecting the multi connector

1. Before disconnecting, lower the attachment down on a solid and even

surface. Switch off the auxiliary hydraulics.

2. Disconnect attachment hoses by pressing on the red button on the multi

connector and simultaneously turn the lever away from the machine.

3. After ending the operation put the multi connector on its holder on the

attachment.

When fitting an attachment, make sure that the hydraulic hoses are not overstretched and not in a

position where they can be trapped during the operation of the machine and attachment.

Also read the additional instructions for coupling and using of the attachment in the Operator’s manual of the attachment.

Releasing the pressure of the hydraulic system

Make sure that there isn’t pressure in the hydraulic system that could cause danger during service operations.

In order to release the pressure in the hydraulic system, stop first the engine and lower the boom down completely.

Move all control levers, including control lever of the telescopic boom and auxiliary hydraulics, to extreme end

positions a couple of times. Remember that the boom or attachment can move by itself when releasing the pressure.

Move the levers until all movements have stopped.

NOTICE

Содержание 500 Series 2019

































































Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды

AVANT 500 Series 2019, Руководство оператора

Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды