AVANT 500 Series 2019 Скачать руководство пользователя

Страница: 14 / 64

500 Series

Description of the loader

Main parts of the loader

Following picture shows the main parts of the loader:

Front frame

On the front frame are mounted: driver’s seat,

operating controls, hydraulic control valves, hydraulic

oil tank, auxiliary hydraulics outlet, front wheels,

hydraulic motors and the loader boom with attachment

coupling plate.

Back frame

On the back frame are mounted: engine with

accessories, battery, parking brake, fuel tank,

hydraulic pumps, rear wheels, hydraulic motors,

counterweights.

Articulation joint

Articulation joint connects the front and back frame.

The loader is steered hydraulically by the steering

cylinder which is mounted between the front and

back frames. Hydraulic hoses and electric wires are

conducted through the articulation joint.

Loader boom

Loader boom is mounted on the front frame with a

pivot pin. The attachment coupling plate is mounted

on the lower end of the boom. The boom is telescopic,

extending 600 mm hydraulically.

Attachment coupling plate

Attachments are mounted on the attachment coupling

plate. The locking pins on the plate can be operated

manually (standard) or hydraulically (option).

Auxiliary hydraulics outlet

The hydraulic hoses of hydraulically operated

attachments are mounted on this outlet. The outlet

is equipped with the multi connector quick coupling

system and is double acting: it has two pressure

lines and one tank line. Also the optional attachment

control switch pack socket is mounted on the multi

connector. In addition, as an option, it is also possible

to install a single or double acting auxiliary hydraulics

outlet in the rear of the machine, or a double acting

outlet in the front under the multi connector.

ROPS safety frame

ROPS frame (Roll-over protective structure) complies

with the standard ISO 3471:1994 with Amendment

1:1997 and Technical Corrigendum 1:2000.

FOPS canopy

FOPS canopy (Falling objects protective structure)

mounts on the ROPS. It meets the ISO 3449:2005

FOPS level 1 (1365 J) criteria.

Hydraulic
connectors
Multi connector

Tank line

Attachment control switch

pack socket (option)

Pressure 2

Pressure 1

Содержание 500 Series 2019

































































Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды

AVANT 500 Series 2019, Руководство оператора

Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды