AVANT 500 Series 2019 Скачать руководство пользователя

Страница: 57 / 64

500 Series

Maintenance and service

Main fuses

In the event of electric malfunction, always check the

fuses first. If fuse is blown repeatedly, search for cause of

burning fuse. Electric cables may be damaged. Contact

Avant service, if necessary.

Main fuse box L and ROPS

located outside the cab, on the right side of the loader

boom.

On loaders equipped with ROPS canopy or cab L, lift the

boom first for easier access to the main fuses, if possible.

Remember to use the service support. If the boom cannot

be lifted, the fuses can be checked after removing the

right side cover plate.

On loaders equipped with cab LX and DLX under a metal

cover below the windscreen.

Main fuse box cab LX and DLX

The main fuse box on loaders with cab

LX/DLX is located outside the cab, on

the right side below the windscreen

under a metal cover.

Light bulbs

Hydraulic oil cooler fan fuse

The red indicator on the dashboard indicates blown

hydraulic oil cooler fan fuse. If the indicator is lit, check

the 25A fuse of the oil cooler fan. Contact Avant service if

necessary.

Jump start and auxiliary power

The engine can be started with auxiliary power if necessary,

by using appropriate (strong enough) jump start cables.

1. Connect first one end of the positive cable to thepositive

(+) post of the dead battery.

2. Connect the other end of the positive jumper cableto the

positive (+) post of the charged battery.

3. Connect one end of the negative jumper cable tothe

negative (-) post of the charged battery.

4. Connect the other end of the negative jumpercable to

a solid, non-paint coated metal part of theengine of the

dead loader, as far from the deadbattery as possible.

Read Operator’s manual of the

vehicle that is giving auxiliary power,

in order to make sure that the vehicle

is suited for that. The vehicle can

get damaged when giving auxiliary

starting power.

Never bypass battery or connect

cables directly to starter motor.

Engine may get damaged.

ROPS canopy or cab L

Cab LX and DLX

Light bulb

Part no.

Lamp type

1. Front light 1000 lumen

66266

2. Work light 700 lumen (option)

66068

3. Work light 2500 lumen (option)

A419163

4. LX/DLX Headlamps

CAUTION

Содержание 500 Series 2019

































































Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды

AVANT 500 Series 2019, Руководство оператора

Результаты поиска

Содержание 500 Series 2019

Отзывы:

Похожие инструкции для 500 Series 2019

Бренды по названию

Популярные бренды