AVANT 500 Series 2019, Руководство оператора

Страница: 23 / 64

23
500 Series
Rated operating capacity
To determine how much the loader can handle safely, a
table of the tipping load and a calculated Rated Operating
Capacity (ROC) is shown in the adjacent label.
A rated Operating capacity label is located near the driver’s
seat and can be read while you sit on the driver’s seat.
Rated operating capacity depends on type of use of the
loader:
• In bucket and general application the rated operating
capacity is 50% of tipping load
• In pallet fork application the rated operating capacity is
60% of tipping load
The information shown in the table is the worst case
minimum load, with the conditions listed below. Actual lifting
capacity could be significantly higher, or it may be lower,
depending on terrain conditions, available lifting force, and
load distribution. Adding or removing counterweights will
affect the indicated ROC.
The ROC table is valid, when:
• The ground is firm and level
• Loader is stationary or driven max 2 km/h, with smooth
and slow control movements
• Driver 75 kg is seated on the driver’s seat
• Load is distributed evenly on pallet forks, with the load
centre of gravity at 400 mm from the vertical part of
pallet fork arms. The weight of the fork attachment is
taken into account in the indicated load values
Risk of tipping over when handling
heavy loads - See the warnings and
safety instructions about handling of
heavy loads shown in this manual.
Rated operating capacity
Different loader configurations, rows in the label:
1. Loader frame in straight position, standard
counterweight fitted
2. Loader frame in fully articulated position, standard
counterweight fitted
Different positions of the loader boom, columns in the
label:
1. Maximum tipping load, stability when lifting load just
off the ground
2. Boom lifted to horizontal position (least stable
position)
3. Rated operating capacity in pallet fork application
1 2 3
528
kg
1 2 3
Rated Operating Capacity
1570 1070 720 540 360
1350 910 610 460 310
1170 790 520 400 270
o
+
180 kg
A419546
ISO 14397-1
Tipping load
WARNING