AVANT 500 Series 2019, Руководство оператора

Страница: 5 / 64

5
500 Series
Safety first
Incorrect or careless operation of the loader may cause a serious accident. Before putting
the machine into operation, familiarise yourself with the use of the machine and read
and understand this Operator’s Manual, as well as all relevant safety instructions, local
regulations, and safe working practices.
Understand the limitations of speed, braking, steering and stability as well as loading
capacity of the machine before starting operation. Make sure that everyone who operates or
works with this equipment is familiar with these safety precautions. If you have no previous
experience of the machine, make sure to do all testing at a safe and open place with no
persons in the area of operation.
Read this Operator’s manual, and also the Operator’s manual of the attachment(s), the
engine owner’s manual, safety decals and other safety instructions before beginning to
operate the loader. Failure to follow the safety precautions listed in this manual may result
in personal injury and/or damage to the equipment.
1. Remember the correct working position. When driving,
be comfortably seated in the driver´s seat, keep your
feet in their proper place in the footwell and at least
one hand on the steering wheel.
2. When seated, always keep the seat belt fastened and
keep hands and feet inside the operator’s area.
3. Before leaving driver’s seat, always:
• Lower the loader boom and place attachment flat
on ground
• Engage the parking brake
• Stop the engine, remove the ignition key
4. Start the operation slowly and carefully. Practise
driving of the machine at a safe and open place before
connecting any attachment, and follow the instructions
in this Manual and also the operator’s manual of the
attachment.
5. Operate the control levers with careful and deliberate
movements. Avoid abrupt movements when handling
the load, in order to prevent the load from falling and to
keep the machine stable.
6. Keep away from the danger zone of the lifted boom
and don’t let anyone go there.
7. Keep your hands, feet and clothing away from all
moving parts, hydraulic components, and hot surfaces.
8. Make sure that there is enough open space around the
loader and its attachments for safe driving and use of
the attachments
9. Do not transport the load with the boom lifted. Always
carry bucket or attachment as low as possible, and put
the load down whenever you leave the machine.
10. It is not allowed to transport persons with this machine.
Do not transport or lift persons in the bucket or in any
other attachment.
11. Do not exceed the tipping load. Familiarise yourself
with and follow the load diagrams in this Manual.
12. When turning with the machine, remember that the
driver´s seat extends beyond the turning radius of the
wheels (collision risk).
13. Do not operate the loader in an explosive environment
or in a place where dust or/and gases can create a fire
or explosion hazard.
14. Keep the engine area clean of flammable materials.
15. Read the lifting, towing and transportation instructions
on page 42.
16. Switch off the battery disconnect switch whenever
leaving the machine unattended.
17. Follow all inspection, service and maintenance
instructions. If you notice any faults or damages on
the machine, these must be repaired before starting
operation.
18. Before any maintenance or repair operation always
stop the engine, lower the boom down and release
pressure from hydraulic system. Read safety
instructions for maintenance on page 46.
19. Do not let any person operate this loader who has not
read safety instructions and is not familiar with the safe
and correct use of this loader.
20. Never operate the loader or attachments while under
the influence of alcohol, drugs, medication that may
impair judgement or cause drowsiness, or if not
otherwise medically fit to operate the equipment.
Safety instructions
General safety instructions - Always follow all instructions to avoid personal injury
DANGER