Autonics AiC-D-20LA, Руководство пользователя

Страница: 63 / 116

8 Control Input/Output
ⓒ Copyright Reserved Autonics Co., Ltd. 63
8.2.2 General Output (AiC-D: 10, AiC-D-B: 9)
8.2.2.1 Standard type
Signal name Description Pin
OUT0 to OUT9 General Output 0 to 9 41 to 50
8.2.2.2 Built-in brake type
Signal name Description Pin
OUT0 to OUT8 General Output 0 to 8 41 to 49
It is general output at program mode.
It is used with OPC, OPT instruction.
8.2.3 Example of Output Circuit Connection
All output circuits are insulated with photocoupler.
External power input is available from 5VDC to 80VDC with the open collector method.
Select R
L
value that I
C
(collector current of secondary LED) of photocoupler to be around
10mA.
R
L
=
VEX − 0.7V
0.01A
8.2.4 Brake Output
In order to reduce heat in the brake, connected to the motor, the driver outputs DC power to
turn off the brake.
When supplying power to the driver after connecting the driver and brake, the rated
excitation voltage is supplied and the brake power is released after approx. 1 sec.
Then after approx. 0.2 sec, the excitation voltage is decreased to 11.5VDC and the released
brake power is maintained.
※While power is supplied to the driver, the brake is kept turning on, except in the Servo On
status.