Autonics AiC-D-20LA, Руководство пользователя

Страница: 56 / 116

8 Control Input/Output
56 © Copyright Reserved Autonics Co., Ltd.
8.1.1.5 Step0, 1/±Run/±Jog
(1) Step0, 1
It is available to set the start address of program mode among 0 to 63 range by 6-digit
bit of Step0 to Step5.
 Step0=Least significant bit
 Step5=Most significant bit
(2) ±Run
Accoridng to the set parameter, it drives to CW (+Run) / CCW (-Run) direction as
continuous mode.
(3) ±Jog
Accoridng to the set parameter, it drives to CW (+Jog) / CCW (-Jog) direction during ON
jog signal.
If +Jog signal and –Jog signal are supplied at the same time, the motor stops.
8.1.1.6 Step2, 3/SSP0, 1 (start speed)
(1) Step2, 3
It is available to set the start address of program mode among 0 to 63 range by 6-digit
bit of Step0 to Step5.

Step0=Least significant bit
 Step5=Most significant bit
(2) SSP0, 1
It is available to set the start drive speed of jog mode, continuous mode by 2-digit bit of
SSP0, SSP1.
SSP1 SSP0
Start speed 1 OFF OFF
Start speed 2 OFF ON
Start speed 3 ON OFF
Start speed 4 ON ON
Start speed 5 is not available.