Austro Engine AE300-Wizard Скачать руководство пользователя страница 84

Страница: 84 / 89

AE300-Wizard

Document No.:

E4.08.09

AE_xx_000

Revision:

Page:

84 of 89

Dept.:

Electric/Electronic

Type:

User Guide

10.5.3

Aborts

The reasons for an abort can be grouped into three areas and the AE300-Wizard will report

the reason for the specific abort to the maintenance technician and will suggest the next

step.

Not meeting all of the pre flash conditions will lead to an abort without even attempting

the software update session.

The maintenance technician can abort at any time by clicking on the Cancel button
during a software update session.

Unexpected and unrecoverable (by automatic retries) events during the software update

sessions, for instance loss of power in the aircraft, loss of CAN connection or similar in-

fluences, will lead to an abort.

In most of these scenarios, the reason for the abort can be resolved by the maintenance

technician (reestablish power to the aircraft, reconnect the CAN cable, etc.) and a manual

restart of the software update will be successful.
E.g. bus voltage too low:

E.g. update process cancelled at user’s request:

Содержание AE300-Wizard

























































































Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды

Austro Engine AE300-Wizard, Руководство пользователя

Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды