Austro Engine AE300-Wizard Скачать руководство пользователя страница 11

Страница: 11 / 89

AE300-Wizard

Document No.:

E4.08.09

AE_xx_000

Revision:

Page:

11 of 89

Dept.:

Electric/Electronic

Type:

User Guide

1.6

Purchased Parts Package

The package contains the following parts.

The CD containing the AE300-Wizard program installer, Visual C++ 2010, .NET

environment version 4.0 and the CAN driver for the AE300-Dongle.

The AE300-Dongle connects the EECU (9-pin CAN connector) to your PC (USB

connector).

The User Manual you are reading as a PDF file.

1.7

Austro Engine Legal Notices

1.7.1

Copyright Notice

1.7.2

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing

restrictions on use and disclosure and are protected by intellectual property laws. Except as

expressly permitted in your license agreement or allowed by law, you may not use, copy, re-

produce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish,

or display any part, in any form, or by any means. Reverse engineering, disassembly, or de-

compilation of this software, unless required by law for interoperability, is prohibited.

1.7.3

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to

be error free. If you find any errors, please report them to us in writing.

1.7.4

Hazardous Applications Notice

This software and hardware is developed for usage in aircraft with an AE300 engine in

ground mode. It is not developed or intended for use in any other (e.g. inherently danger-

ous) applications, including applications that may create a risk of personal injury. If you use

this software or hardware in dangerous applications, then you shall be responsible to take all
appropriate fail safe, backup, redundancy, and other measures to ensure its safe use. Austro

Engine Corporation and its affiliates disclaim any liability for any damages caused by use of

this software or hardware in dangerous applications.

Содержание AE300-Wizard

























































































Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды

Austro Engine AE300-Wizard, Руководство пользователя

Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды