Austro Engine AE300-Wizard Скачать руководство пользователя страница 19

Страница: 19 / 89

AE300-Wizard

Document No.:

E4.08.09

AE_xx_000

Revision:

Page:

19 of 89

Dept.:

Electric/Electronic

Type:

User Guide

Upgrade Installation

Users with a working installation of an older AE300-Wizard release who wish to perform an

upgrade rather than a new installation can do so, using an MS-Installer (upgrade) package

which is downloadable from the Austro Engine homepage:

Data\AE_Wizard.msi

5.1

Download Upgrade Package

Log in to the customer section of the Austro Engine homepage using your assigned user
name and your password to download the latest AE300-Wizard upgrade package:

Step 1:

If you have not done so already, please contact Austro Engine “After Sales” at

(

[email protected]

) to obtain your login for the customer area.

Step 2:

Use your favorite browser to go to

http://www.austroengine.at

Step 3:

Type in your username and password to access the customer area.

Step 4:

Select “customer area”



“Manuals”



“AE300-Wizard”.

Step 5:

Download “AE300-Wizard



Wizard Software version 1.3.4.433” (use always the

latest software version).

Step 6:

Download “AE300-Wizard



Wizard User Guide” and save it on your PC-system

(e.g. on the “Desktop”) for later use.

5.2

Remove Previous AE300-Wizard Version

To avoid possible incompatibilities between previously installed libraries and new versions in-

cluded in the new AE300-Wizard upgrade package it is highly recommended to manually re-

move the current AE300-Wizard package first – before attempting installation of the upgrade

package. Any aircraft data or log files already stored on your PC-system will remain in “My

Documents”, they will not be removed by the following procedure:

Step 1:

“Start”



“Control Panel”



“Add or Remove Programs”.

Step 2:

Look for the entry “AE300-Wizard” and select the “Remove” option.

Step 3:

Close “Add or Remove Programs”, close “Control Panel”.

5.3

Install Upgrade Package

Double clicking on the upgrade package downloaded as described in “5.1 Download Upgrade

Package” initiates the upgrade installation which will guide the user through the process:

Select a target folder (e.g. "

C:\Program Files (x86)\Austro Engine\AE300-

Wizard

") where the program should be installed.

After the installation has finished it is also recommended to install a shortcut on your desk-

top pointing to your personal folder (in standard installations is this "My Documents\Austro

Engine\AE300-Wizard"). This allows easy access to stored log files and folders created during

diagnostic sessions.

Содержание AE300-Wizard

























































































Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды

Austro Engine AE300-Wizard, Руководство пользователя

Результаты поиска

Содержание AE300-Wizard

Отзывы:

Бренды по названию

Популярные бренды