manualshive.com logo in svg

AUMA SA 07.2-UW, Руководство по эксплуатации

Поделиться
Скачать
AUMA SA 07.2-UW Скачать руководство пользователя страница 9

For further Service & Support, software/apps/... refer to www.auma.com.

Control

Table 2:

Control examples (indications on actuator controls name plate)

Description

Input signal

Control via Profinet interface

Profinet

Control via Profinet interface and control voltage for OPEN-CLOSE control
via digital inputs (OPEN, STOP, CLOSE)

Profinet/24 V DC

2.2.

Short description

Multi-turn actuator

Definition in compliance with EN 15714-2/EN ISO 5210:

A multi-turn actuator is an actuator which transmits torque to a valve for at least one
full revolution.

AUMA multi-turn actuators are driven by an electric motor. For setting and emergency
operation, a handwheel can be installed as an option, Switching off in end positions
may be either by limit or torque seating. Actuator controls are required to operate or
process the actuator signals.SA 07.2-UW – SA 16.2-UW/SAR 07.2-UW – SAR
16.2-UW

Actuator controls

AC 01.2 actuator controls are used to operate AUMA actuators and are supplied
ready for use. The actuator controls are mounted separately on a wall bracket.

The functions of the actuator controls include standard valve control in OPEN-CLOSE
duty, positioning, process control, logging of operating data, diagnostic functions
right through control via various interfaces (e.g. Fieldbus, Ethernet and HART).

Local controls/

AUMA software

Operation, setting, and display can be either performed directly at actuator controls
or alternatively from Remote via binary input signals, or using another interface.

The following options are available at the actuator controls in local operation:

●

The actuator can be operated via the push buttons of the local controls or set-
tings can be made in the actuator controls menu. The display shows information
on the actuator as well as menu settings (contents of these instructions).

●

Using the AUMA CDT software for Windows-based notebooks or the AUMA
Assistant App for Android-based devices, data can be uploaded and read
whereas settings can be modified and stored.The connection between computer
and actuator controls is wireless via Bluetooth interface (not included in these
instructions). AUMA CDT software can be downloaded free of charge from our
website www.auma.com.

Non-Intrusive

Non-Intrusive version (control unit: electronic):

Limit and torque setting is performed via the controls, without removal of actuator or
actuator controls covers. For this purpose, the actuator is equipped with an MWG
(magnetic limit and torque transmitter), also capable to supply analogue torque
feedback signals/torque indication and analogue position feedback signals/position
indication at the actuator controls output.

9

SA 07.2-UW – SA 16.2-UW / SAR 07.2-UW – SAR 16.2-UW Control unit: electronic (MWG) 
AC 01.2 Non-Intrusive Profinet 

Identification

Содержание SA 07.2-UW













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды