AUBO AUBO-i10, Руководство пользователя

Страница: 113 / 179

V4.5
©2015-2019 AUBO.All rights reserved.
109
Figure 10-29 YOZ
The figure above is yOz type, The first point requires for the calibration is the origin of the coordinate
system. The second point is any point on the positive of the Y-axis, and the third point is any point on the
positive semi-axis of the Z-axis. The angle formed by the three points is a right angle.
Figure 10-30 ZOX
The figure above is zOx type, The first point requires for the calibration is the origin of the coordinate
system. The second point is any point on the positive of the Z-axis, and the third point is any point on the
positive semi-axis of the X-axis. The angle formed by the three points is a right angle.
Figure 10-31 XOXY
The figure is xOxy type, The first point requires for the calibration is the origin of the coordinate system,
the second point is any point on the positive semi-axis of the X-axis, and the third point is formed at any
point within the first quadrant of the xOy plane. The angle formed by the three points is an acute angle.