SW5502C
Wireless Serial Server
User Manual
Configuration and
setup
Figure 4.47
Management List Page
After finish configuring the Management List, please click on Save & Apply button to keep the change that you have
made and to apply your setting
.
A pop
-
up window with message
“
Please wait for a while
…”
will be displayed
.
When
the saving is finished, the pop
-
up window will disappear and the web browser will remain on the Management List
page
.
If you want to cancel the change and reset all changes back to their original values, just click the Cancel
button
.
4.9.6
Ping
The Web UI of SW550XC has an interface to call Ping, which is a network diagnostic utility for testing reachability
.
You can use the Ping function to determine whether SW550XC can reach the gateway or other devices in the
network
.
To use the Ping, enter a destination IP address in the text box behind the Ping To and click Start button
as shown in Figure 3
.
49
.
This process usually takes around 20 seconds
.
The two figure below represent a
successful ping without packet loss from SW550XC to the address 10
.
0
.
50
.
201 and back,
and the connecting
device at the address 10
.
0
.
50
.
202 is unreachable in which no packets have returned from the transmitted ping
packets
.
