SW5502C
Wireless Serial Server
User Manual
Configuration and
setup
Figure 4.20
Transition page during the gathering of surrounding wireless network information
.
An example of a list of nearby WLAN APs which is reported by the Site Monitor is shown in Below figure
.
The available information include the SSID, the Mode of IEEE 802
.
11 standards
(
which could be 802
.
11b, 802
.
11g,
802
.
11n, or a combination of standards
)
, the radio Channel number, the Authentication mode
(
such as Open, WPA
-
PSK, WPA2
-
PSK, WPA2
(
PEAP
)
, WPA2
(
EAP
-
TLS
)
, WPA2
(
EAP
-
TTLS
))
, the Encryption standards
(
such as None, WEP,
AES or TKIP or a combination of TKIP
/
AES
)
, the data rate in Mbps, and the quality of the wireless signal which is
reported in Signal
%.
The
“
Refresh
”
button at the bottom of the page allows user to obtain the latest information from the Site Monitoring
process
.
Note that when there are two numbers under the Channel column, it means that there are Primary Channel
and Secondary Channel used by that access points
.
Figure 4.21
Results of a Site Monitoring of SW550XC Series
.
