SW5502C
Wireless Serial Server
User Manual
Configuration and
setup
Figure 4.37
E
-
mail Settings Page
Second for the E
-
mail Server part, you must enter an IP address
or Host Name
of a Mail Server
which is in your
local network in the SMTP Server
’
s text box
.
Note that the maximum length of SMTP server address is 31
characters
.
If your Mail Server
(
or Simple Mail Transfer Protocol
(
SMTP
)
Server
)
requires a user authentication, you
must check the
“
SMTP server authentication required
”
box in the Authentication option
.
After enabling this option,
you can fill in the Username and the Password
below
.
Please consult your local network administrator for the IP
address of you Mail Server and the required Username and Password
.
At the end of the page, there is a Send Test
Mail button for you to click to verify whether the E
-
mail Settings
are configured correctly
.
Note that after clicking
the Send Test Mail button, a pop
-
up window with message
“
Please wait for a while
…”
will be displayed and will be
followed with another pop
-
up window indicating the success or failure status of sending test e
-
.
Figure below
shows a pop
-
up window indicating a failure of sending a test e
-
.
Figure 4.38
Sending Test E
-
mail Failed
