SW5502C
Wireless Serial Server
User Manual
Configuration and
setup
Figure 4.8
Pop
-
up Windows of Network Setting
You may proceed then to change the IP address, Subnet mask, and Gateway, and Host name of SW550XC to avoid
any IP address conflict with other hosts on your LAN or to connect the device to your existing LAN as shown in
Figure 3
.
8
.
After click
“
OK
”
button,
the system will prompt you for a credential to authorize the changes
.
That is it
will ask you for the Username and the Password as shown in Figure 4.9
A pop
-
up window as shown in Figure 4.10
will prompt the user to wait for the change on the SW550XC device
.
The device will be restarted without any beep
.
After the device is restarted, it will beep twice to indicate that the
unit is running normally
.
Then, the SW550XC device can be found on a new IP address
.
It may be listed
automatically by the Device Management Utility along with its old record or it can be found by clicking on the
Rescan icon
.
Figure 4.9
Authorization for Change
