SW5502C
Wireless Serial Server
User Manual
Configuration and
setup
“
There is no event
”.
To save all events to a local file
(
on your personal computer
)
, you can
click on
“
Save To File
”
button
.
4.9
Web configuration
–
System Setup
4.9.1
Date/Time Settings
Date and time can be set manually or using Network Time Protocol
(
NTP
)
to automatically synchronize date and
time
of SW550XC with a Time Server
.
Figure below shows the Date
/
Time Settings page
.
Note that the Current
Date
/
Time will be updated automatically on this page
.
To enable automatic time synchronization, please check the
“
Obtain date
/
time automatically
”
box in the NTP option below NTP Server Settings
part
.
Then
proceed to enter the
IP address or host
name for the NTP Server
.
Note that if a host
name is entered, the DNS server must be configured
properly
(
see detail in Section 4.3 above
).
Additionally, a Time Zone can be selected as well from the drop
-
down
list
.
Daylight Saving Time Setting
is enabled when
Enable Daylight Saving Time box is checked
.
When it is enabled,
the user can select the detailed setting, such as Start Date and End Date with Offset
.
Manual Time Settings can be
set in the lower part where user can set Date and Time using corresponding drop
-
down lists
.
Figure 4.43
Date
/
Time Settings Page
Attention
It is also important to setup Default Gateway and DNS Servers in the Network Settings
properly
(
See
Section 3
.
5
)
, so SW550XC can lookup DNS names and point to the proper
NTP server
.
