Atom Medical Corporation V-2200, Руководство по обслуживанию и замена запчастей

Страница: 55 / 212

53
(5) Markers on the past data screen
①
Alarm information is shown by means of appropriate markers along the time axis of the graphs.
②
Markers on the past data 1 screen and the past data 2 screen are explained below.
③
The marker to indicate the beginning of communication and the marker to indicate the stopping of
communication for a communication failure will be shown on each graph. The time when the latest of
these markers was recorded will be shown in the lower right part of the screen.
Explanation of markers on the past data 1 screen
Marker to indicate a communication
failure between CPU and display (red)
Marker to indicate a communication failure
of the weight monitor (purple)
Marker to indicate a high temperature alarm
in manual control (MC, MCO) (blue)
in servo control (SC, SCO) (red)
Marker to indicate a deviation alarm
in manual control (MC, MCO) (green)
in servo control (SC, SCO) (white)
Marker to indicate a skin temperature probe alarm
in manual control (MC, MCO) (light blue)
in servo control (SC, SCO) (yellow)
Marker to indicate a system failure (red)
Marker to indicate a low water level alarm (white)
Marker to indicate a humidity chamber off
alarm (white)
Marker to indicate a selected humidity alarm
(blue)
Marker to indicate a humidity sensor alarm
(light blue)
Marker to indicate an oxygen sensor
alarm (yellow)
Marker to indicate an oxygen
concentration alarm (green)
Marker to indicate an oxygen flow rate
alarm (red)
Marker to indicate “Power ON/OFF”
(light blue)