Atom Medical Corporation V-2200, Руководство по обслуживанию и замена запчастей

Страница: 33 / 212

31
5-3-1. Hood
●
Access Port Cover
Remove all the access port covers. Immerse and
clean them in a disinfectant solution.
Spare access port covers should always be
on hand. A dirty cover should be
replaced immediately with a new one.
●
Snap-open Access Port Packing
Remove the rubber packing from the snap-open
access port. Immerse and clean it in a disinfectant
solution.
●
Front Admittance Panel Packing
Remove the rubber packing from the front
admittance panel. Immerse and clean it in a
disinfectant solution.
●
Tube Introduction Slit Assembly
Remove the packing from the tube introduction slit
assembly. Immerse and clean it in a disinfectant
solution.
●
Sensor Module
Remove all the cables connected to the sensor
module. Remove also the connector to the relay box.
Pull the sensor module out of the hood and lift it up.
Wring tightly a soft cloth dampened with a
disinfectant solution and clean the sensor module.
Do not immerse the sensor module in
water. Immersing it in water will cause
trouble.