Atex AR950, Руководство по эксплуатации

Страница: 64 / 106

57
How to Work
■
Inspecting, Changing and Re fi lling Transmission Oil
1. Remove the oil check bolt at the rear left of the
transmission case and check if oil is fi lled to the
oil check hole (position of the oil check bolt).
2. If oil quantity is low, remove the oil fi ller cap
and re fi ll the speci fi ed oil to the oil check hole
(position of the oil check bolt).
3. After re fi lling oil, securely tighten the oil check
bolt and install the oil fi ller cap.
●
As a rough guide, fi rstly change transmission oil after 50 hours from
initial start of engine and then every 500 hours thereafter.
●
How to Inspect
Oil fi ller cap
Oil check bolt
1. Prepare an appropriate container into which oil
is drained.
2. Remove the drain bolt and drain oil.
3. Securely tighten the drain bolt.
4. Remove the oil check bolt and oil fi ller cap, and
re fi ll the speci fi ed oil to the oil check hole
(position of the oil check bolt).
5. After re fi lling oil, securely tighten the oil check
bolt and install the oil fi ller cap.
●
How to Change
Drain bolt