Atex AR950, Руководство по эксплуатации

Страница: 65 / 106

58
How to Work
■
Inspecting, Changing and Adding HST Oil
1. Open the engine cover and remove the cap on
the HST oil tank.
2. Inspect the oil level and make sure that oil up
to 10 mm from the bottom of HST oil tank
remains.
3. If the oil quantity is lower, re fi ll the speci fi ed
oil until the oil level reaches approx. 10 mm
from the bottom of the HST oil tank.
●
As a rough guide, fi rstly change HST oil after 50 hours from initial
start of engine and then every 200 hours thereafter.
●
Be careful not to re fi ll too much HST oil, as excess oil may over fl ow
from the cap.
●
Don’t re fi ll any HST oil other than the speci fi ed oil. If different oils
are mixed, the machine may break down.
●
How to Inspect
HST oil tank
−
FULL
−
−
ADD
−