Atex AR950, Руководство по эксплуатации

Страница: 45 / 106

38
■
4 wheel drive system (AR950F)
How to Work
Danger
●
Hydraulic devices are hot during or after working. Pay attention
not to get burnt.
●
The hot oil may blow out, so don’t open the oil cap during
working or after working.
●
The oil blowed out or leaked from oil tank may have high
pressure or high temperature, so don’t touch the oil. When
stopping the engine, inspect the area around the engine
after making sure of cooling down completely.
The driving system features on-demand four-wheel drive by the hydraulic
control. This machine has the method of switching the two-wheel drive or four-
wheel drive automatically by hydraulic control.
It can be switched either to four-wheel drive or two-wheel drive according to load
condition and ground condition, etc.
●
When going down on the slope or traveling in slippy area, if take turn
while traveling at high speed, the turning radius of left side may be 10~20 %
bigger than right side, paying attention to operate the machine.