Atex AR950, Руководство по эксплуатации

Страница: 49 / 106

42
How to Work
3. Put the throttle lever in “ “ to raise the
engine speed.
4. Adjust the cutting-height adjustment lever to
the position of “125 mm” cutting height.
5. Slowly tilt the cutting-blade clutch lever into
the “On” position, and the cutting blade will
start to turn.
●
Before shifting the cutting-height adjustment lever up and down,
make sure to tilt the lever toward the seat to “Unlock” the lever. If the
lever is operated by force while the lever is still “Locked”, the machine
may break down.
Use the ECO-drive mode if it is not the heavy duty
work. (Refer to p.45 of this manual)
●
The cutting-blade clutch lever cannot be operated while the cut
ting-height adjustment lever remains in the “Start Engine” position.
If the cutting-blade clutch lever is operated by force in this condition,
the machine may break down.
Cutting-height
adjustment lever
125 mm
Cutting-blade clutch lever
On
Throttle Lever