ASTRO-MED QLS-2000XE SERIES, Инструкция по эксплуатации и установке

Страница: 154 / 214

6-28 Troubleshooting
4 Remove the media retainer from the media unwind mandrel.
5 Install a roll of media on the mandrel. Ensure that the roll is fully seated
on the mandrel and reinstall the retainer to secure it.
6 Thread the media around the media guide roller and through the media
sensor housing.
7 On QLS-2001 Xe models, thread media under the media index roller. On
all other models thread media over the media index roller.
8 On models with standard print stations, thread the media over the platen
rollers and under the guide rollers (if present). On models with inverted
print stations, thread the media beneath the platen roller.
9 After threading the media over the platen roller on the last print station,
thread the media over the drive roller and out of the printer.
10 Slide the media against the plastic guide block on the vertical plate. Be
sure not to buckle the media against this block.
11 Close the printheads and the drive roller.