ASTRO-MED QLS-2000XE SERIES, Инструкция по эксплуатации и установке

Страница: 150 / 214

6-24 Troubleshooting
Loading Ribbon
The ribbon path will vary based on whether the printstation is in the
standard or inverted position. Ribbon path illustrations for each printstation
type are provided below.
Standard Printstation Inverted Printstation
To load ribbon:
1 Be sure power is Off. Raise the printer cover.
2 Fully seat thermal transfer ribbon roll on the thermal transfer ribbon
unwind mandrel. Ensure that the ribbon unwinds to the left of and
beneath the roll.
3 Fully seat a cardboard take-up core on the associated thermal transfer
ribbon rewind mandrel.
4 Open the printhead (flip printhead cam lever counterclockwise on
standard printstations, clockwise on inverted printstations).
5 Advance the thermal transfer ribbon around the outside of each station’s
thermal transfer ribbon guide roller(s). An illustration of the ribbon path
is screened on the back plate of the printer as a guide.