ASTRO-MED QLS-2000XE SERIES, Инструкция по эксплуатации и установке

Страница: 136 / 214

6-10 Troubleshooting
Colors do not match (Color matching from monitor to
printed label)
1 Try adjusting heat intensities of printheads.
(See Selecting a Printhead Intensity on page 6-33)
Logo, Image, or Text is not clear (Blurry, not sharp)
1 Examine the logo/image being used. It should be 300 dpi and not Anti-
Aliased.
2 If you scanned the image it may need to be cleaned up. The best place to
clean up artwork is in the originating program. When exporting as a .tif
or.pcx (bitmap) DO NOT enable anti-aliasing.
3 Use original artwork, as opposed to scanning, whenever possible. If you
can
ʹ t use the original artwork and recreate the text and you are familiar
with a graphics editing package, you can utilize tools to clean-up the
image or text. Eliminate anti-aliasing and stray pixels.
Logo or Image does not print
1 Ensure the image is not off of the label in the program you are using.
2 Ensure the image name does not have any spaces, periods, or any
uncommon characters in it. (I.e. image 1.5 x 3.5.tif will not print. Rename
it to image15x35.tif)
3 Ensure the ribbon is loaded correctly.
(See Loading Ribbon on page 6-24)
4 Ensure the labels/tags are loaded correctly.
(See Loading Label/Tag Media on page 6-26)
5 Ensure all printheads that you want to use are enabled.
(See Enabling/Disabling Printheads on page 6-29)
6 Ensure proper ribbon match for the material you are trying to print on.